Gas Hot Water Repairs & Replacement in Cherrybrook NSW

Our licensed gasfitters look after the complete life of a hot water system, from the emergency repair when the shower runs cold through to planned replacement years later. Breakdown work takes in pilot lights that keep going out, failed electronic ignition, worn thermocouples, stuck gas valves and cylinders that have started to weep. We also service units properly, checking the sacrificial anode, cleaning the burner and testing the TPR valve, fit new tempering valves, install storage and continuous flow systems and upgrade gas lines and flues on both natural gas and LPG.

Our team sets aside after-hours and emergency time specifically for no hot water calls and leaks, and we fill those slots in the order they come in. The person who attends is a licensed gasfitter, so faults with the pilot, thermocouple, gas valve or ignition can be fixed properly rather than patched. A quick description of the unit and the symptoms when you call helps us bring the right parts.

The short answer is the local area and everything around it. Hot water replacements and larger gasfitting jobs can take us a fair way beyond that, and we are happy to quote on properties out of town.

Several things move the price of a hot water replacement up or down. Swapping an old storage cylinder for a similar one is usually the most straightforward job, while switching to continuous flow may call for a larger gas line, new flue arrangements and relocated pipework. LPG properties, tricky access and the condition of the existing fittings also play a part. Ask for a free written quote and you will see exactly where the money goes.

Smell gas at any point while the pilot is out or while you are relighting it, close the isolation valve on the unit and stop. Do not try again. Call a licensed gasfitter to check the appliance, because a persistent gas smell is a different problem from a pilot that simply will not hold and needs to be looked at promptly.

A strata committee asked us whether the work on a shared hot water plant would be certified. The answer was straightforward because our gasfitters are licensed and each job closes with a compliance certificate for the building’s records. The business carries public liability insurance for common property work as well.

Imagine a system that still works but has become too small since the family grew, with showers running cold most mornings. There is nothing to repair here, because the unit is doing exactly what it was built to do. The fix is a larger storage capacity or a continuous flow unit sized to the household, and we would help you choose between them. An undersized system is one of the clearest cases for replacement.

Replacement work is a one-day job for the vast majority of homes. Simple swaps run a few hours and larger changes to the system type, gas supply or flue extend the visit without normally requiring a second day. Your quote states the expected time so you can arrange to be home.

For a landlord booking a service on a rental property the visit doubles as a dated safety record. We test for gas leaks and carbon monoxide, check the flue has a proper draught, operate the TPR valve, and confirm the tempering valve is delivering a maximum of 50 degrees Celsius to the bathrooms. The burner is cleaned and its flame checked, gas pressure is tested at the regulator, the ignition is tested, and the written report gives you and your property manager a clear record of the unit’s condition for your files.

Whether we install a new system or repair your existing one, the workmanship is guaranteed. New units also come with the manufacturer’s warranty, and keeping that warranty valid is one of the reasons the installation must be done by a licensed gasfitter who issues a compliance certificate. We give you the certificate and invoice on the day, and those two documents are all you need to lodge a claim later.

Most gas hot water failures come down to one of a handful of causes. The pilot light has gone out or its thermocouple has worn, the electronic ignition or gas valve has faulted, or the gas supply itself has been interrupted by a closed isolation valve, an empty LPG bottle or a problem at the meter. Less often the fault sits in a leaking TPR valve, a tempering valve that has drifted, or a cylinder that has simply reached the end of its life.

A storage cylinder is rated by its capacity in litres, while a continuous flow unit is rated by its flow rate in litres per minute at a given temperature rise. Those two numbers measure different things, which is why a direct comparison can mislead. Capacity protects you during a busy peak and flow rate protects you from running out altogether. Matching the right number to your household is the whole decision.